Deck Equipment & Mooring Systems
Windlasses, capstans, mooring winches, cranes, davits, bollards, fairleads and towing equipment.
Deck equipment carries high loads and sits in the most corrosive location on the vessel. Structural integrity, brake performance, load testing and coating quality are the central inspection themes.
Inspection checkpoints
The numbers correspond to the checkpoints marked in the diagram above. Select a point in the diagram to jump to its explanation.
- Drum, gypsy and shaft dimensionsDrum and gypsy dimensions are measured against the drawing and against the chain or rope actually supplied. A chain wheel that does not match the chain size causes jumping and wear.
- Brake holding and clutch functionThe brake is tested to hold the specified static load without slip, and the clutch is engaged and released under realistic conditions. Brake lining contact is checked.
- Rope or chain path and fairlead alignmentThe lead of rope or chain from drum to fairlead, roller or hawse pipe is checked for correct angles and for clearance from structure, to avoid chafing and uneven spooling.
- Bollard and foundation welding, SWL markingWelds between fitting, deck and under-deck stiffening are examined, and the reinforcement is compared with the approved drawing. The safe working load must be marked permanently on the fitting.
- Load test and coating systemWinches, cranes and davits are tested with certified weights at the required overload. Coating thickness and holiday-free application are verified, since deck equipment works in the most corrosive location on board.
Typical documentation
Load test certificates, material certificates, brake test records, class certificates, coating records.