Marine Engineering Terminology
Systems and components that keep a vessel operating: piping, heat transfer, fluid handling and auxiliary systems.
Weight, normally sea water in dedicated tanks, carried to adjust draft, trim, heel and stability.
The lowest internal part of the hull where water collects, and the rounded transition between bottom and side. Bilge systems pump this water out.
A vertical-axis rotating drum used for heaving mooring lines.
A rim on a pipe, valve or fitting that allows a bolted, gasketed joint. Dimensions and pressure ratings follow standards such as EN 1092-1, ASME B16.5 or JIS.
Equipment transferring heat between two fluids without mixing them. Plate and shell-and-tube types are common for cooling engines and oil.
A packaged unit with tank, pumps, motor, valves, filters and coolers supplying pressurised hydraulic fluid to actuators. Abbreviated HPU.
A pipe or block with several inlets or outlets that distributes or collects flow, such as a cargo manifold or a hydraulic manifold block.
A machine that moves liquid by adding energy to it. Centrifugal pumps are used for high flow; positive displacement pumps for viscous fluids and high pressure.
A drain opening that leads water from a deck overboard or to a drainage system.
A recess in the underwater hull, fitted with a grating, from which sea water is drawn for cooling, ballast and fire-fighting systems.
A device that starts, stops, regulates or directs flow in a pipe. Gate, globe, butterfly, ball and check valves are the main marine types.
A deck machine for hoisting and lowering the anchor and chain, with a chain wheel (gypsy) and brake.