Inspection & Testing

Inspection methods, non-destructive testing and acceptance tests from factory to sea.

Bollard PullInspection & Testing

The static pulling force a vessel can exert on a fixed bollard, the key performance figure for tugs and anchor handlers.

CommissioningInspection & Testing

The controlled process of bringing installed equipment and systems into operation and verifying they function as designed.

FATInspection & Testing

Factory Acceptance Test: tests performed at the manufacturer's works to demonstrate that equipment meets its specification before shipment.

HATInspection & Testing

Harbour Acceptance Test: tests of installed equipment and systems carried out with the vessel alongside, before sea trials.

Hydrostatic TestInspection & Testing

A pressure test using water, in which a component or system is pressurised above its working pressure and held to prove strength and tightness.

Inclining TestInspection & Testing

A test in which known weights are moved across the deck of the nearly completed vessel and the resulting heel is measured, to determine lightship weight and vertical centre of gravity.

Insulation Resistance TestInspection & Testing

Measurement of the resistance of electrical insulation by applying a DC test voltage between conductors and earth, commonly called a megger test.

Load Bank TestInspection & Testing

A test in which a generator is loaded with a resistive or reactive load bank to prove its rated output and behaviour under load.

Magnetic Particle TestingInspection & Testing

An NDT method for ferromagnetic materials: the part is magnetised and fine iron particles gather at surface and near-surface discontinuities.

NDTInspection & Testing

Non-Destructive Testing: methods of examining materials and welds for defects without damaging them, including visual, penetrant, magnetic particle, ultrasonic and radiographic testing.

Penetrant TestingInspection & Testing

A surface NDT method in which a coloured or fluorescent liquid is drawn into surface-breaking defects and made visible by a developer.

Radiographic TestingInspection & Testing

A volumetric NDT method using X-rays or gamma rays to produce an image of a weld or casting, showing internal defects.

SATInspection & Testing

Sea Acceptance Test: tests at sea demonstrating system performance under operating conditions. In industry generally SAT also means site acceptance test.

Sea TrialInspection & Testing

The programme of tests carried out at sea before delivery to verify speed, manoeuvrability, machinery performance and equipment function.

Shaft AlignmentInspection & Testing

The process of positioning shaft bearings and the engine or gearbox so that bearing loads and shaft stresses stay within limits in all operating conditions.

Ultrasonic TestingInspection & Testing

A volumetric NDT method using high-frequency sound waves; reflections reveal internal defects and allow thickness measurement.

Visual TestingInspection & Testing

Examination of a surface or weld by eye, with aids such as gauges, lighting and magnification. It is the first NDT method applied.