Marine Instrumentation

Pressure, temperature, level and flow instruments, tank gauging, gas detection and their calibration.

Indication against a reference standard1Calibration certificates and validity2Process connection and material3Sensor installation and protection4Signal loop and alarm set-points5
Illustrative process visualization

Instruments are small items with large consequences: a wrong range, material or calibration undermines every test that relies on them. Verification covers selection, certificates, installation and loop function.

Inspection checkpoints

The numbers correspond to the checkpoints marked in the diagram above. Select a point in the diagram to jump to its explanation.

  1. Indication against a reference standardThe instrument is compared with a reference of higher accuracy at several points over its range, rising and falling. Errors are recorded against the permitted tolerance.
  2. Calibration certificates and validityCertificates are checked for traceability to national standards, the calibration date and the range covered. Instruments used during acceptance tests must be within their calibration period.
  3. Process connection and materialThread or flange type, pressure rating and wetted materials are checked against the process medium and the pipe specification. Wrong materials in sea water service fail quickly.
  4. Sensor installation and protectionSensors are checked for correct location, orientation and immersion depth, for isolation valves and for protection against vibration, heat and mechanical damage.
  5. Signal loop and alarm set-pointsThe loop is tested from the sensor to the display by simulating the signal. Alarm and trip points are checked at the specified values, and the reading is compared at each end.

Typical documentation

Instrument index, data sheets, calibration certificates, loop check records, type approvals for essential services.

Related inspection and engineering services