Safety & Life-Saving Equipment

Lifeboats, rescue boats, liferafts, davits, fire-fighting systems, fire doors and dampers.

Certificates and approval markings1Stowage, securing and release arrangement2Launching appliance load test3Service and expiry dates4Location against the safety plan5
Illustrative process visualization

Safety equipment is strictly regulated and type-approved. Owner's inspection concentrates on correct certificates for the exact models supplied, installation according to the safety plan, and witnessed function and load tests. Statutory acceptance is the responsibility of flag and class.

Inspection checkpoints

The numbers correspond to the checkpoints marked in the diagram above. Select a point in the diagram to jump to its explanation.

  1. Certificates and approval markingsEach item is checked for the correct approval marking and a certificate that covers the exact model and remains valid. Serial numbers on the equipment are compared with those on the documents.
  2. Stowage, securing and release arrangementStowage must allow quick release. Lashings, hydrostatic release units, painters and cradles are checked against the manufacturer's installation instructions.
  3. Launching appliance load testDavits and winches are tested with the required proof load after installation. Brake performance, limit switches and lowering speed are recorded and witnessed.
  4. Service and expiry datesLiferafts, hydrostatic releases, pyrotechnics, extinguishers and batteries carry expiry or service dates. These are listed, so that nothing is delivered already overdue.
  5. Location against the safety planThe position and quantity of every item are compared with the approved fire and safety plan, and the markings and signs on board with the plan symbols.

Typical documentation

Type approval certificates, load test certificates, service certificates, safety plan, installation test records.

Related inspection and engineering services